CERASTAR X (hard) ceramic lacquer has a higher hardness level and dries very quickly.
Cleaning is very easy. It is more resistant than other HS or UHS varnishes to micro-scratches, scratches, mechanical friction, and also to attack from various chemicals.
The exceptional properties of CERASTAR® varnish:
It is a top-quality varnish designed for cars and motorcycles, easy to use, extremely hard, and with maximum gloss. It can also be used in construction and industry for components subject to significant friction or frequent exposure to chemicals.
Ceramic varnish for rims
ST8900X ceramic varnish is extremely hard and dries very quickly (in 45 minutes).
Because the varnish can harden very quickly, it is advisable not to work at temperatures above 20 or 25°C when spraying complete cars.
However, it is not a varnish that adheres directly to the metal.
It's possible to apply ceramic varnish to a rough metal edge by applying a coat of SILAX P760 transparent metal primer 2 minutes beforehand.
CERASTAR® ceramic varnish is fully compatible with water-soluble and solvent-based car body paint systems.
Can we sand or polish "ceramic" varnishes?
Yes, but because the varnish is very hard, this is more difficult. Use a hard polishing pad (Finixa Red).
Available in 500ml kit, 1L kit and 2L kit
Mixing ratio is 1:1
TDS pdf