The Yellow One PaintMask 30,5cm x 3m

30,5cm wide 3 meters long.
Resistant to urethane paints and leaves no residue, making it easy to remove.

The Yellow One PaintMask is an extremely thin, flexible, professional-quality vinyl mask with a paper backing that peels off easily.

Ideal for custom spray paint, intricate graphic designs, airbrushing, and more.
Works well with a cutting plotter.

The vinyl cuts cleanly with a sharp edge. It can be removed without leaving any residue. It is UV and solvent resistant when used.

Important!

When using with a cutting plotter, perform a test cut first.
Set the baseline to 90-120g force with a 45° blade. Adjust as needed.

• Easy to cut and remove
• Conforms to complex curves
• Removal in one piece, without residue
• Suitable for automotive urethane paints
• 0.08mm thick
• Resistant to 43°C (110°F) during baking

If residue is left behind, it is likely due to improper application, extreme environmental conditions, or adhesive transfer from surrounding materials. Here are the recommended methods to remove stubborn adhesive residue from surfaces like plastic, metal, or wood.

Recommended Removal Methods:
Commercial Adhesive Removers: Products like Goo Gone, Goof Off, or specialized cleaners like Avery Adhesive Remover are highly effective at breaking down the adhesive.
Heat Application: Use a heat gun or hairdryer on a low-to-medium setting to warm the residue, making it easier to peel or wipe away.
Solvents:
Isopropyl Alcohol (IPA): Effective for most plastics and painted surfaces.
Naphtha (Lighter Fluid): Often recommended for plastic-safe cleaning.
WD-40: Good for removing stubborn adhesive on metal or plastic.

Oil-Based Methods: Vegetable oil, olive oil, or peanut butter can be used to break down the adhesive, particularly on wood surfaces.

"Tape Trick": Apply a fresh piece of strong tape (like grey duct tape) over the residue and pull it off rapidly; the new adhesive often pulls the old residue with it.