A-Stand 2303 Paleburnt Metal

30ml bottle

A-STAND ultra-fine metallic color
With A-Stand's wide range of metallic colors you can give your model any metallic finish including copper, brass, gold, chrome, various shades of burnt metal and even beautiful bright kandy colors. These metallic colors are extremely strong, impenetrable to any product or paint, and the extremely fine pigments ensure a perfectly smooth finish.

Why A-Stand
A-Stand's colors flow well and spray easily with a 0.2mm nozzle without clogging your airbrush. It dries to a strong, durable finish for easy application of other paints, weatherproof lacquers, lacquers and acrylics. In addition, A-Stand paint makes it easy to apply good masking tape to hard surfaces.

A-Stand products are dry in just 30 minutes, depending on the amount of paint applied, humidity and temperature. Allow to dry for at least an hour before safely applying other products. A-Stand will fully cure after 24 hours. For best results, A-Stand is best airbrushed.

Please note that A-Stand is a solvent based paint and contains harmful ingredients. It is recommended to use a suitable spray mask in a well-ventilated area.
A-Stand is ready to spray, but can be slightly thinned with A-Stand Airbrush Thinner & Cleaner A.MIG-2013. It can also be used to clean the airbrush. Do this immediately after use.

Available in various fillable and sandable primers and a high-gloss black base and high-gloss white and gray as a base layer for the chrome effect. A black base is a must, especially with chrome and other metallic colours. To protect high gloss chrome colors from fingerprints etc., after they are completely dry (at least 12 hours, preferably 24 hours), the chrome can be refinished with A.Mig-2503 Aqua Gloss Clear Coat.